When the conveyor belt is in normal operation, the belt speed is not lower than the rotating speed of the drum
Ninety-five percent.
If the friction between the roller and the conveyor belt is not enough, the conveyor belt is prone to slipping
Elephant. There are many reasons why the friction between the drum and the conveyor belt is not enough, and the common ones are:
Insufficient tension, load starting, cylinder surface friction coefficient is not enough.
The reasons for insufficient tension are: insufficient tensioning stroke, insufficient counterweight weight,
The conveyor belt is too long;
The reason why the friction coefficient of the drum surface is not enough is: the drum surface is coated with rubber grinding
The damage is too large, the belt body is too wet or sticky with lubricating oil, the surface of the belt body is sticky with materials (easy to be








