Xiamen Hee Industrial Belt Co., Ltd. is one of the most professional manufacturers and suppliers of pvc treadmill running belt roll in China. With abundant experience, we warmly welcome you to buy high quality pvc treadmill running belt roll at competitive price from our factory.
How do I change my treadmill belt?
1, first ready to replace the maintenance of electric treadmill materials and tools, generally required material tools have various models of adjustable wrenches, flat screwdriver, thin line, and new run
Yes.
2, then check the treadmill brake device first to ensure the flexibility of the treadmill brake;
3. Stop pumping, brake, stop the donkey head in a position close to the upper dead point for easy operation, cut off the power supply, and lock the brake lock block;
4. Take off the belt cover, loosen the top wire and fixing screws of the motor slide rail, and move the motor forward with a crowbar to relax the belt;
5, take off the old belt, put on a new belt;
6, use the crowbar to move the motor rail backwards to the appropriate position, and then use the crowbar to adjust the position of the motor around;
7, use a crowbar to adjust the motor rail or motor position, so that the motor pulley and input shaft pulley into a "four-point line" can be;
8. Adjust the tightness of the belt with the top wire, make the tightness of the belt appropriate, tighten the top wire, apply butter to the top wire, measure the tightness of the belt and the "four points and one line" of the two belts;
9. Use an adjustable wrench to tighten the motor orbital fixing screws diagonally and install the belt cover;
10. Take out the brake lock block, check that there is no barrier around the pumping unit, power supply, release the brake, start the pumping unit, and observe whether the belt swings;
11, after the completion of the above steps, the treadmill running belt is successfully replaced, and the tools can be packed at this time.
Hot Tags: pvc treadmill running belt roll, China, manufacturers, suppliers, factory, buy
