Xiamen Hee Industrial Belt Co., Ltd. is one of the most professional manufacturers and suppliers of pvc belt conveyor in China. With abundant experience, we warmly welcome you to buy high quality pvc belt conveyor at competitive price from our factory.
Conveyor belt in operation, the reasons for slipping are many, the common reasons and solutions are:
1, the initial tension is too small. Insufficient tension at the point where the conveyor belt leaves the drum causes the conveyor belt to slip. This situation generally occurs at the start, the solution is to adjust the tension device, increase the initial tension.
2, starting too fast can also form slippage. At this time, it can be started slowly, and it can be started again after clicking twice, which can also effectively overcome the phenomenon of skidding.
3, the tail roller bearing damage does not turn or the upper and lower roller bearing damage does not turn too much. The cause of the damage is that the tail float and sink too much, not timely maintenance and replacement of damaged or inflexible parts, so that the resistance increases resulting in slippage.
4, the friction between the driving drum and the conveyor belt is not enough to cause slip. The main reason for this is water on the conveyor belt or humidity in the environment. The solution is to add some ground rosin to the roller. However, be careful not to use the hand to add, and use the blast equipment to blow into, so as to avoid personal accidents.
5, the conveyor belt load is too large, more than the motor capacity will also slip. At this time, the advantage of slipping is to protect the motor. Otherwise the motor will be burned for a long time. But for the operation, it is a skid accident.
Hot Tags: pvc belt conveyor, China, manufacturers, suppliers, factory, buy, conveyor belt types, green conveyor belt, matt conveyor belt, PVC Conveyor Belt, treadmill belt, types of belt conveyor
