Address: NO.45, Zhennan 7th RD, Tongan District, Xiamen City, China.
FAX : +86-592-5144207
Conveyor belt joints are generally used in three ways, whether it is corrugated ribs or other processing methods, basically these kinds of connections.
One: conveyor belt mechanical joint method
Generally speaking, the use of belt buckle joints is convenient and convenient, and economical, but the joints are inefficient and easily damaged.
It has a certain impact on the service life of conveyor belt products. PVC and PVG whole core flame retardant antistatic conveyor belt joints, generally 8 grades
The following products use this joint method.
Conveyor belt cold bonding head method
That is, a cold-adhesive adhesive is used for the joint. This joint method is more efficient and economical than mechanical joints and should be able to compare
Good joint effect, but from the practical point of view, because the process conditions are difficult to master, the quality of the adhesive has a great influence on the joint.
Big, so it is not very stable. At present, the well-known adhesives in China are the Shengka SK811 conveyor belt glue, the LDJ243 series, etc.
The tape delivery is relatively large in domestic use.
Conveyor belt hot vulcanization joint method
Conveyor joints have proven to be the most ideal joint method in many years of actual combat, ensuring high joint efficiency and very stable.
The joint life is also very long and easy to grasp. However, there are disadvantages such as troublesome process, high cost, and long joint time.